Product Description: position type control pressure gauge system draw lessons from foreign advanced products of similar structural features and careful development of pressure measurement instrument. The meter can be measured fluid medium pressure position type control ( output on / off signal ) at the same time, synchronous indicating the measured pressure value.

The use of high power micro switch, can be used to directly control the general equipment, control and indication system, respectively, by three independent spring tube drives action, without mutual interference, stable and reliable performance, the case and the pressure guiding system uses the stainless steel material, good corrosion resistance.

Technical parameters

Instructions: accuracy of ± 1.5% FS

Set point error:±3% FS

Repeatability:1% FS

Switching difference:

Measuring range ( MPa ) switch difference (≤%FS )

0.1,0.1615

0.25,0.4,0.6,11010

More than 1.666

Measuring range: 0~ 0.1to 0~ 60MPa series

-0.1 ～0 to -0.1 ～2.4MPa series

Contact capacity:

AC220V ×15A

AC380V ×8A

DC24V ×1.5A resistive load

Insulation resistance : not less than 20MΩ

Dielectric strength:50Hz sinusoidal alternating current2000V voltage for 1 minutes

Working conditions:

Ambient temperature -25 ℃~ +55 ℃

The relative humidity is lower than 95%

Working environment vibration resistance: V.H.3

Protection grade: IP54

Weight:2kg